Polynomial Long Division Calculator
Dividing one polynomial by another is a routine task in algebra, and synthetic division is the fast written method for the common case where the divisor is a simple expression of the form x minus a number. This Polynomial Long Division Calculator handles exactly that case for a quadratic dividend, giving you the quotient, the remainder and a built-in check value in one step.
The dividend in this calculator is a monic quadratic, written as x squared plus b x plus c. You enter the coefficient b, the constant c and the value r from the divisor x minus r. The calculator then performs the synthetic division steps and reports the quotient as an expression in x, together with the remainder.
The pages below explain how the method works, why the remainder equals the value of the polynomial at r, and how to check any answer by hand. Two fully worked examples show every step, and the frequently asked questions cover the cases students meet most often, including negative values and a zero remainder.
What Polynomial Long Division Does
Long division of polynomials works like long division of whole numbers. You divide the dividend by the divisor, build up a quotient term by term, and stop when what is left, the remainder, has a lower degree than the divisor. For a quadratic dividend and a linear divisor, the quotient is linear and the remainder is a single number.
The result is always written as dividend equals divisor times quotient plus remainder. That identity is more than a summary: it is the definition of a correct division. If you multiply your quotient by the divisor and add the remainder, you must get the original polynomial back, term for term.
When the divisor is x minus r, the remainder has a special meaning known as the remainder theorem: the remainder on dividing a polynomial by x minus r equals the value of the polynomial at x equals r. This calculator shows that check value next to the remainder so you can see the theorem holding in every calculation.
Synthetic Division Step by Step
Synthetic division is a compressed version of long division that works only with the coefficients. For the dividend x squared plus b x plus c, the coefficients are 1, b and c. Write r, the number from the divisor, to the left, and work from left to right with a simple rhythm of multiply and add.
First, bring the leading coefficient 1 straight down. Multiply it by r to get r, and add that to b, giving b plus r. This is the second coefficient of the quotient. Then multiply b plus r by r, and add the result to c. That final total is the remainder, because there are no further coefficients to process.
The quotient is read from the first two results: it is x plus the value b plus r. Notice how little writing is involved compared with full long division. The method is short because the divisor is linear with a leading coefficient of 1, so every division step inside the working disappears.
Reading the Quotient and Remainder
Suppose the calculator gives a quotient of x plus 7 and a remainder of 20 for a division. That is a complete statement: x squared plus b x plus c equals the product of x minus r and x plus 7, plus 20. The quotient tells you the shape of the division, and the remainder tells you how far the division is from being exact.
A remainder of zero is the special case that matters most in later algebra. It means the divisor is a factor of the dividend, and r is a root of the equation formed by setting the polynomial to zero. Factor questions, graph questions and equation questions all lean on this single fact.
Signs need care when r is negative. Dividing by x plus 3 means the divisor is x minus negative 3, so r is negative 3, not 3. Entering the wrong sign for r is the most frequent cause of a wrong answer with this method, and the check value exposes it at once.
How to Use the Polynomial Long Division Calculator
The calculator follows the synthetic division layout exactly. Prepare your dividend and divisor, then follow these steps.
- Write your dividend in the form x squared plus b x plus c, and type the coefficient b into the first box.
- Type the constant c into the second box, keeping its sign exactly as written in the polynomial.
- Look at the divisor x minus r and type the value r into the third box. For a divisor such as x plus 3, r is negative 3.
- Select Calculate and read the quotient, the remainder and the check value P(r) in the result box.
- Select Reset to clear the page and start another division.
Before accepting an answer, glance at the remainder and the check value. They should always be equal. If they are not, a figure has been typed incorrectly, because the remainder theorem guarantees the two values match for any correct division.
Worked Example 1: Dividing x Squared + 5x + 6 by (x - 2)
Divide the polynomial x squared plus 5x plus 6 by x minus 2. Here b is 5, c is 6 and r is 2.
- Step 1: List the coefficients of the dividend: 1, 5 and 6. The divisor x minus 2 gives r equals 2.
- Step 2: Bring the leading coefficient 1 down. This becomes the x coefficient of the quotient.
- Step 3: Multiply 1 by r. 1 times 2 is 2. Add this to b: 5 plus 2 is 7. This is the constant term of the quotient.
- Step 4: Multiply 7 by r. 7 times 2 is 14. Add this to c: 6 plus 14 is 20. This final total is the remainder.
- Step 5: Check with the remainder theorem. P(2) is 4 plus 10 plus 6, which is 20, matching the remainder.
The calculator returns a quotient of x + 7, a remainder of 20.00 and a check value P(r) of 20.00, so the division reads: x squared plus 5x plus 6 equals (x minus 2)(x plus 7) plus 20.
Worked Example 2: Dividing x Squared - 3x - 10 by (x + 2)
Divide the polynomial x squared minus 3x minus 10 by x plus 2. The divisor must be written as x minus r, so r is negative 2. Here b is negative 3 and c is negative 10.
- Step 1: List the coefficients: 1, negative 3 and negative 10. The divisor x plus 2 is x minus negative 2, so r equals negative 2.
- Step 2: Bring the leading coefficient 1 down as the x coefficient of the quotient.
- Step 3: Multiply 1 by r. 1 times negative 2 is negative 2. Add to b: negative 3 plus negative 2 is negative 5, the constant term of the quotient.
- Step 4: Multiply negative 5 by r. Negative 5 times negative 2 is 10. Add to c: negative 10 plus 10 is 0, so the remainder is 0.
- Step 5: Check with the remainder theorem. P(negative 2) is 4 plus 6 minus 10, which is 0, matching the remainder.
The calculator returns a quotient of x - 5, a remainder of 0.00 and a check value of 0.00. A zero remainder means x plus 2 is a factor, and indeed x squared minus 3x minus 10 factorises as (x plus 2)(x minus 5).
The Remainder Theorem and the Factor Theorem
The remainder theorem states that when a polynomial P(x) is divided by x minus r, the remainder equals P(r). Synthetic division shows why: the multiply and add steps build exactly the same arithmetic as substituting r into the polynomial, collecting the powers of r as they appear.
The factor theorem is the remainder theorem read in the other direction. If P(r) is zero, the remainder is zero, so x minus r divides the polynomial exactly and is one of its factors. Testing candidate values of r and watching for a zero remainder is a standard way to start factorising a polynomial.
Together the two theorems turn division from a chore into a tool. A single synthetic division answers three questions at once: it evaluates the polynomial at r, it produces the quotient, and it reports whether r is a root of the corresponding equation.
Checking a Division by Multiplying Back
Every division can be checked without repeating it. Multiply the divisor by the quotient and add the remainder; the result must be the original dividend. For the first worked example, x minus 2 times x plus 7 is x squared plus 5x minus 14, and adding the remainder 20 gives x squared plus 5x plus 6, the dividend we started with.
This check catches the two errors that occur most often: a sign slip in the multiply and add steps, and the wrong value of r for divisors written with a plus sign. It takes seconds and is worth doing on any answer that will be used in later parts of a question.
The calculator's third output exists for the same reason. P(r) is computed directly from the polynomial, independently of the division steps, so agreement between the remainder and P(r) confirms that both routes to the answer give the same number.
When to Use Long Division Instead
Synthetic division in this form covers a monic quadratic divided by x minus r. Full long division is needed when the divisor is quadratic, when the divisor has a leading coefficient other than 1, or when the dividend has degree three or higher with terms missing that must be held by zero placeholders.
The ideas do not change. You still build a quotient term by term, still finish with a remainder of lower degree than the divisor, and the result still satisfies dividend equals divisor times quotient plus remainder. Only the amount of writing grows.
A practical approach in coursework is to use this calculator for the many routine linear-divisor cases, and save full long division for the questions that genuinely need it. That keeps your effort focused on the structure of the problem rather than on repeated arithmetic.
Tips for Polynomial Division
- Always rewrite the divisor as x minus r. For x plus 3 the value of r is negative 3. Most wrong answers with this method trace back to this single sign decision.
- Keep every sign attached to its coefficient. Write b and c with their signs from the start, and let the multiply and add steps carry the signs through the working.
- Use the remainder theorem as a check. Evaluate the polynomial at r directly. If that value differs from your remainder, the division contains an error.
- Multiply back to be fully sure. Divisor times quotient plus remainder must rebuild the dividend exactly, term by term, with nothing left over.
- Treat a zero remainder as information. It means the divisor is a factor and r is a root, which often unlocks the next part of the question.
- Watch the quotient degree. Dividing a quadratic by a linear divisor always gives a linear quotient. Any other shape signals a mistake.
- Practise the multiply-add rhythm. Synthetic division is fast because the pattern never changes: multiply by r, add to the next coefficient, repeat.
- Record the full division statement. Writing dividend equals divisor times quotient plus remainder keeps the result usable for factorising and graph questions later.
Frequently Asked Questions
1. What does this calculator divide?
It divides a monic quadratic, x squared plus b x plus c, by a linear divisor of the form x minus r.
You supply b, c and r, and it returns the quotient, the remainder and the check value P(r).
2. What is synthetic division?
Synthetic division is a shortened written method for dividing a polynomial by x minus r using only the coefficients.
It replaces the full long division layout with a repeating pattern of multiply and add.
3. Why does the remainder equal P(r)?
The multiply and add steps of synthetic division perform the same arithmetic as substituting r into the polynomial.
This is the remainder theorem: the remainder on dividing by x minus r is always the value P(r).
4. What does a remainder of zero mean?
A zero remainder means the division is exact, so x minus r is a factor of the polynomial.
It also means r is a root of the equation P(x) equals zero.
5. How do I handle a divisor like x + 4?
Rewrite it as x minus negative 4, so r is negative 4, and enter negative 4 in the third box.
Using positive 4 by mistake is the most common error with divisors written with a plus sign.
6. Can b or c be negative?
Yes. Enter b and c exactly as they appear in the polynomial, signs included.
The method handles negative coefficients without any change to the steps.
7. Can b or c be zero?
Yes. A zero coefficient simply takes part in the same multiply and add steps.
For example, dividing x squared plus 4 by x minus 1 uses b equals 0 and c equals 4.
8. What form does the quotient take?
The quotient is always linear: x plus a number, or x minus a number when that value is negative.
That number is b plus r, the second value produced by the synthetic division steps.
9. How can I check my answer?
Multiply the divisor by the quotient and add the remainder. The result must be the original dividend.
You can also compare the remainder with the check value P(r) shown by the calculator.
10. Does this work for cubic polynomials?
This calculator is built for quadratic dividends. Cubics follow the same synthetic division pattern with one extra step.
The multiply and add rhythm continues across all the coefficients of the dividend.
11. What if the leading coefficient is not 1?
This calculator assumes a leading coefficient of 1, which covers a large share of textbook questions.
For other leading coefficients, full long division or a first rearrangement of the polynomial is needed.
12. Why is the check value always equal to the remainder?
Because of the remainder theorem, the two quantities are the same number reached by two different routes.
If they ever disagree in your own working, an arithmetic slip has occurred somewhere in the steps.
13. What is the factor theorem?
The factor theorem says x minus r is a factor of P(x) exactly when P(r) equals zero.
It is the remainder theorem applied to the special case where the remainder vanishes.
14. Can r be a fraction or a decimal?
Yes. The steps work for any real value of r, including fractions and decimals.
Enter the decimal value of r and read the quotient and remainder in the same way.
15. Is synthetic division the same as long division?
It produces the same quotient and remainder, but only for divisors of the form x minus r.
Full long division handles every divisor; synthetic division trades that generality for speed.
CONCLUSION
Synthetic division reduces a polynomial division to three short steps: bring down, multiply and add, multiply and add. This Polynomial Long Division Calculator carries out those steps for a quadratic dividend, reports the quotient and remainder, and confirms the answer with the remainder theorem check value, all from the three numbers b, c and r.
Use it to check homework, to hunt for factors by testing values of r, and to build fluency with the method itself. Once the multiply and add rhythm feels natural on quadratics, the same pattern extends smoothly to longer polynomials.