Bra Calculator
The Bra Calculator turns two tape measurements into a bra size you can actually shop with. Most people wear the wrong size for years, usually a band that is too loose paired with cups that are too small, simply because letter-and-number sizing feels like a code nobody explained. In truth the code is simple arithmetic, and once you see it, you can check your size at home in about a minute.
The method rests on two measurements. Your underbust, taken snugly around your ribcage just beneath the bust, sets the band number. Your bust, taken around the fullest point, combined with the underbust, sets the cup letter: each inch of difference between the two measurements steps the cup up by one letter. The Bra Calculator does that arithmetic for you and also offers a sister size, an alternative with a larger band and smaller cup that holds the same cup volume.
This guide explains how to measure correctly, how the sizing system works, and how to interpret the result, with two worked examples using realistic measurements. It also covers the fit problems a calculator cannot see, so you can fine-tune in the fitting room instead of guessing across a rack of sizes.
The Band Number: Your Ribcage, Rounded
The band size is the number in a bra size, such as the 34 in 34C. It comes from the underbust measurement: the tape sits level around the ribcage, directly under the bust, pulled snug enough that it does not slide but not so tight that it digs in. Bra bands are made in even numbers, so the calculator rounds your measurement to the nearest even number, rounding up when you land on an odd one.
The band does most of the work in a bra. Roughly four fifths of the support comes from a firm, well-fitting band, not from the shoulder straps. A band that rides up at the back is too large, whatever the label says, and a band you cannot fit two fingers under is too small. Getting this number right with the Bra Calculator is the foundation everything else builds on.
The Cup Letter: A Difference, Not a Size
The cup letter confuses shoppers because it is not an absolute size. It encodes a difference: bust measurement minus underbust measurement. A difference of about 1 inch is an A cup, 2 inches a B, 3 inches a C, 4 inches a D, 5 inches a DD, and each further inch adds another step. The same letter therefore holds very different volumes on different bands: a 30D and a 38D share a difference, not a volume.
This is why changing band size usually means changing the letter too, and why the calculator reports a sister size alongside your main result. Sister sizes keep the cup volume roughly constant while shifting the band: go up one band and down one cup letter, or down one band and up one letter. They are the first thing to try when your calculated size feels close but not quite right in a particular brand.
Measuring Well: The Two Minutes That Decide Everything
Measure over a non-padded, well-fitting bra or against bare skin, standing relaxed, and keep the tape level all the way around; a tape that slopes at the back quietly adds inches. For the underbust, exhale normally and pull the tape snug. For the bust, let the tape rest at the fullest point without compressing, and do not pull it tight.
Take each measurement twice and use the average if they differ. Measure in inches for the most direct route through the calculator, or select centimetres and let the tool convert for you. Because bodies change with weight, hormones, pregnancy and training, remeasuring every six to twelve months is worthwhile; the size that fit two years ago is a starting guess, not a guarantee.
How to Use the Bra Calculator
The Bra Calculator needs three inputs: Underbust Measurement, Bust Measurement and Measurement Unit. Gather those figures first, then follow these steps.
- Measure your underbust snugly around the ribcage, just under the bust, and enter it in the first field.
- Measure your bust around its fullest point, keeping the tape level and relaxed, and enter it in the second field.
- Choose your measurement unit, inches or centimetres, so the calculator converts correctly.
- Press Calculate to see your band size, your cup size and a sister size in one combined result.
- Try both the main size and the sister size when shopping, and judge them by the fit checks in this guide. Press Reset to measure again.
Worked Example 1: Underbust 32, Bust 37
A shopper measures her underbust at 32 inches and her bust at 37 inches, and wants her starting size.
Step 1: Enter the underbust as 32.
Step 2: Enter the bust as 37.
Step 3: Leave the unit set to Inches.
Step 4: The band size is 32, because 32 is already an even number.
Step 5: The difference is 37 minus 32 = 5 inches, which gives a DD cup, so the calculated size is 32DD.
Step 6: Read the sister size: one band up and one cup down gives 34D, worth trying if the 32 band feels too firm in a particular style.
A result of 32DD surprises many shoppers who have been wearing 34B or 34C for years, yet it follows directly from the measurements: the volume was always there, it was simply labelled in a way that pushed it into a larger band.
Worked Example 2: Underbust 34, Bust 38
A second shopper measures 34 inches under the bust and 38 inches at the fullest point.
Step 1: Enter the underbust as 34.
Step 2: Enter the bust as 38.
Step 3: Keep the unit on Inches.
Step 4: The band size is 34.
Step 5: The difference is 38 minus 34 = 4 inches, giving a D cup and a calculated size of 34D.
Step 6: The sister size is 36C: one band larger, one cup letter smaller, same approximate cup volume.
If this shopper finds the 34 band perfect but the cups gaping in a moulded style, the sister size is not the fix; a different cup shape is. Sister sizes solve band-versus-volume trade-offs, not shape mismatches, and the fit checks later in this guide help separate the two.
Fit Checks the Tape Cannot Do
A calculator gives you a starting size, and the fitting room gives the verdict. The centre front of the bra should sit flat against the chest; floating away usually means the cups are too small. The band should stay level and firm on the loosest hook when new, because elastic relaxes with wear and the tighter hooks extend the bra’s life.
Cups should contain the breast tissue without spilling at the top or sides and without empty space or wrinkling. Straps should stay put with two fingers of give, adjusted after the band and cups are right, since straps are for shaping, not lifting. If one side is larger, fit to the larger side and pad or adjust the other strap; most bodies are slightly asymmetric, and the tape average hides it.
Why Brands Disagree With Each Other
There is no single enforced international standard for bra sizing. Brands cut to different patterns, use different grading between sizes, and vary in how much stretch they build into bands. Some labels use the older plus-four method, adding inches to the underbust before naming the band, which is why an older fitting guide may hand you a larger band and smaller cup than this calculator does.
Treat the calculated size as your anchor across brands, then move one step at a time: sister size for band-versus-volume issues, a cup up or down for cup-only issues. Keep notes on which brands run firm or generous in the band. Within a few fittings you will know your size in each label the way you know your shoe size differs between makers.
When to Remeasure and When to Replace
Bodies are not fixed, and bras are not either. Weight change, strength training, hormonal shifts, pregnancy and nursing all alter both measurements, sometimes by a full band or cup within months. Elastic also gives out: a hard-working bra typically lasts six to twelve months of regular rotation before the band stretches beyond what the hooks can correct.
Remeasure whenever your current bras start failing the fit checks, and rerun the Bra Calculator rather than automatically buying the same size again. Replacing on schedule and sizing from fresh measurements is what keeps support consistent, reduces shoulder and back strain from overloaded straps, and ends the cycle of drawers full of almost-right bras.
Reading Your Result in Context
A single calculation is a snapshot, and snapshots reward a second look. Before you act on the result of the Bra Calculator, set it beside the figures you started with and ask whether the relationship between them makes sense. Results that surprise you are not necessarily wrong, but they always deserve one verification pass over the inputs, because the most common source of a strange answer is a transposed digit or a figure entered in the wrong unit.
Context also means comparing like with like. Run the Bra Calculator again with the alternative figures you are weighing, whether that is a different scenario, a revised measurement or a competing offer, and place the outputs side by side. Decisions are rarely between a number and nothing; they are between two numbers, and this tool is at its best when it produces both of them in the same terms.
Practical Tips for Better Results
- 1. Measure the underbust snugly on an exhale; a loose tape inflates the band size.
- 2. Keep the tape level around the back for both measurements, and measure twice.
- 3. Fit a new bra on the loosest hook so you can tighten it as the elastic relaxes.
- 4. Try the sister size whenever the band and cups feel like they are fighting each other.
- 5. Judge support by the band, not the straps; straps should never carry the load.
- 6. Fit to the larger side if your bust is asymmetric, and adjust the other strap.
- 7. Remeasure every six to twelve months, and after any significant weight or training change.
- 8. Remember cup letters are relative to the band; a D on a small band is a modest volume.
Frequently Asked Questions
1. How accurate is a bra calculator?
It is accurate as a starting size because it works directly from the two measurements the sizing system is built on.
Final fit still depends on breast shape, brand patterns and style, so expect to fine-tune by one step in the fitting room.
2. Why did I get a bigger cup letter than I usually wear?
Most people wear cups that are too small on a band that is too big, a fitting habit inherited from limited shop ranges.
A larger letter on a smaller band often holds the same volume you are used to, just labelled the way the sizing system intends.
3. What is a sister size, exactly?
A sister size keeps roughly the same cup volume on a different band: up one band and down one cup letter, or the reverse.
Your result includes one automatically, and it is the first alternative to try when the main size feels close but not right.
4. Should the band measurement be rounded up or down?
Bands come in even numbers, so an odd measurement rounds up to the next even band.
If you land exactly between two bands, try both; firmer support usually comes from the smaller one that still feels comfortable.
5. Can I measure in centimetres?
Yes. Select centimetres as the unit and enter the measurements as you took them.
The calculator converts them to inches internally, because the sizing steps are defined in inches.
6. What if my two measurements give a difference of less than an inch?
That points to an AA or A cup, depending on the exact difference.
Very small differences can also mean the bust tape compressed the tissue, so retake the bust measurement with the tape resting lightly.
7. Why does my size change between brands?
Brands use different patterns, stretch levels and grading, and there is no enforced global standard.
Use your calculated size as the anchor and step one size at a time within each brand until the fit checks pass.
8. How tight should the band feel?
Firm and level, staying in place when you raise your arms, with room for two fingers underneath.
A new bra belongs on the loosest hook; if it only feels right on the tightest, the band is effectively a size larger than you need.
9. Do cup letters mean the same thing on every band?
No. The letter encodes the difference between bust and underbust, so its volume grows as the band grows.
A 30D and a 38D share a four-inch difference but hold very different volumes.
10. What are the signs my current bra is the wrong size?
A band riding up, straps digging in or slipping, cups spilling or gaping, and the centre front floating away from the chest.
Any two of these together usually mean at least one step of band or cup needs to change.
11. How often should I remeasure?
Every six to twelve months as a routine, and whenever your weight, training or life stage changes noticeably.
Bras also wear out in that window, so remeasuring pairs naturally with replacing stretched-out bands.
12. Should I measure with a bra on or off?
Use a non-padded, unlined bra that fits reasonably, or measure against bare skin.
Padded or push-up styles add volume to the bust measurement and inflate the cup result.
13. What if I am between cup sizes?
Try both, and judge by containment: no spilling, no gaping, and the centre sitting flat.
Shape matters too; a fuller style in the smaller letter can beat a shallow style in the larger one.
14. Does the calculator work for sports bras and bralettes?
It gives the same band-and-cup starting point, which many sports styles are graded from.
Compression styles fit by feel more than by letter, so use the result as a guide and prioritise firm, bounce-free support.
15. Why do fitting guides sometimes add four inches to the band?
That is an older method from an era of non-stretch fabrics, and it produces a larger band and smaller cup than modern measuring.
This calculator uses the modern method: the band is your rounded underbust measurement, which gives the band its proper supporting role.
CONCLUSION
The Bra Calculator turns a question that once needed scattered documents and slow arithmetic into a short, repeatable calculation: enter Underbust Measurement, Bust Measurement and Measurement Unit, and read Band Size, Cup Size and Sister Size. Use it before you commit, use it again when the figures change, and compare its result with reality afterwards. That simple habit, repeated consistently, is what separates decisions that hold from decisions that quietly unravel.
Bookmark this page and return to it whenever the question comes up again. Each visit takes a minute, costs nothing, and replaces uncertainty with a figure you can explain and defend. Clear numbers make for calm decisions, and calm decisions are usually the right ones.